Skip directly to content

ABT Release

Consists of:

1 Three Button Transmitter
1 Three Channel Radio Receiver

Remote controlled release for all makes of clay traps. Releases clays and controls the movement of ABT traps

The 3 buttons have the following functions:
FIRE - fires the trap
U/D - moves up and down (hold to latch)
L/R - moves left and right (hold to latch)

The FIRE button fires the trap as normal.

The U/D button will inch the trap up and down.
Pressing the U/D button for 2 seconds will cause the up/down motion to latch.
Pressing the U/D button for 2 seconds again will release the latch.

The L/R button will inch the trap left and right
Pressing the L/R button for 2 seconds will cause the left/right motion to latch
Pressing the L/R button for 2 seconds again will release the latch

This allows the separate control of each movement remotely

Options

  • Acoustic ABT - As above but with additional tie-clip microphone, for the lone shooter

 

DTL Release

Consists of:

1 Two Button Transmitter
1 Two Channel Radio Receiver

Remote controlled release for all makes of clay traps. Releases clays and controls the movement of DTL traps.

One button releases clays, the other button controls the horizontal motion of the trap.

The motion button is marked L/R, it will inch the trap left and right in small increments.
Pressing the L/R button for 2 seconds will cause the left/right motion to latch. The trap will continue to run until the L/R button is pressed again for 2 seconds to release the latch. 

Options

  • Acoustic DTL - As above but with additional tie-clip microphone for the lone shooter.